Your very own piece of 1952! Broadway is an articulate and versatile germanium preamp and treble booster, based on the iconic Rangemaster treble booster circuit. Each position of the blade switch is EQ’d to match “neck”, “middle”, and “bridge” pickup positions, while its hand-tested Germanium transistors provide a wide spectrum of “Telecaster-esque” tones, generously boosted by the volume knob.

Demo by shnobel

Demo by  Aaron Sternke

Review by reddit /guitarpedals

Manual

Product Page

Broadway

The CopperSound Daedalus is a luscious, plate-style reverb with two independent levels, accessible on the fly. As opposed to using a chip, we wanted to build Daedalus off the newest Belton 3 brick. The Reverb knob controls the amount of reverberation, while the Depth control handles the decay length. The Preamp is the “special sauce” here. It has the ability to add volume to whatever pedal is in the expression loop – enough volume that the external pedal is almost as loud as the initial reverberated note. This can be very useful for swells and experimental players.

The Preamp knob also adds volume to the decay and length of the reverberation, making it a dual purpose knob. The EXP jack allows the user to insert any pedal into the decay of the reverb using a TRS Y cable (not included). The Blend knob gives the user control over the amount of external effect being placed into the decay. A separate reverberation amount can be achieved with the Reverb II knob. This addition allows for two separate reverberation levels on the fly with independent footswitches. Set one for shorter, traditional sounds and the second for longer, drawn out sounds. Both Reverb knobs work with the rest of the controls.

Try the EXP jack with an expression pedal! Simply set the max amount with the Reverb knob. This amount sets the “toe down” position and the “heal down” position is fully dry.

Demo by Aaron Sternke

Official Product Video

Review by The Gear Page

Review by Premier Guitar

Review by AMAZONA

Deadalus

The Triplegraph is a digital octave pedal designed by CopperSound Pedals and Jack White, featuring three proprietary telegraph keys and an integrated auxiliary loop. Utilizing a high-power DSP Blackfin Processor, Triplegraph triggers an octave down with the left key, octave up with the right key, while the middle key activates a killswitch or auxiliary loop. In KILL mode, the middle key acts as a momentary killswitch, allowing the player to remove their dry signal and attain a fully wet octave up and/or down when used in conjunction with the octave keys. In AUXILIARY mode, the player can connect one or more of their favorite effects in parallel with the octaves via the send/return jacks, and trigger them in momentary bursts. The high and low octaves can be triggered in parallel with the dry signal when the octave keys are pressed independently. The octaves themselves track seamlessly with zero latency, and can be triggered in latching or momentary modes, using our “Loctave” toggle switches. The telegraph keys themselves are composed of custom stainless steel and aluminum components, making them indestructible and exceedingly durable for both hand and foot operation. Over four years in the making, the collaborative result is an innovative, state of the art clean-tracking octave pedal, capable of standing its own against industry standards.

Coppersound

Third Man Records

Review by guitar pedal X

Demo by BOB BRADLEY

Triplegraph (Limited Edition Anniversary White)

The Gravity Bomb V2 clean boost pedal picks up where the original left off; delivering up to 20dB of clean boost over the sweep of it’s volume pot, similarly powered by an audiophile-grade Burr Brown Op Amp. With the addition of our Mid-enhance toggle, V2 allows the player to further dial in their boosted tone, by selecting from three different mid-range types. The center position –  just like Gravity Bomb V1 – maintains a flat and neutral EQ curve. In the down position, V2 boosts Mids at 750Hz, while the up position boosts at 1kHz, making this boost pedal a great tool to pair with other pedals to give them a fresh tone and feel. Gravity Bomb V2 features mechanical true-bypass switching. In the off position, the input signal is sent directly to the output. Try it at 18v for increased headroom!

While we were in the designing process for V2, we wanted to maintain the miniature form factor and overall sound. We came up with the idea to incorporate an active mid-range control that would allow the user to access 2 mid-range frequencies in the up or down position on the toggle switch. The completely flat EQ from the original is accessed with the toggle switch in the middle position, making for a perfect choice for a clean boost pedal. We designed a custom enclosure  for our newly redesigned Mini Series. Similar to the familiar 1590A, our enclosure is a little bit taller to make it easier to access while among larger/taller pedals.

Demo by Jordan Collins

Gravity Bomb V2

The CopperSound Pedals Fusion Series Gravity Bomb clean boost pedal delivers up to 20dB of clean boost over the sweep of its volume pot, similarly, powered by an audiophile grade Burr Brown Op Amp.  The CopperSound Pedals Fusion Series Gravity Bomb offers four tonal and character shaping options.  The left toggle allows for selection of two different silicon diodes.  
The right toggle provides two different hi frequency cutting options, making the CopperSounds Pedals Fusion Series Gravity Bomb a highly versatile boost pedal. Gravity Bomb Fusion also features mechanical true bypass switching.  In the off position, the input signal is sent directly to the output.  Try the CopperSound Pedals Fusion Series Gravity Bomb at 18v for increased headroom, dynamics and clarity.

Demo by  FX Pedal Planet Online Store