Bass Pedalboard

ToneX

FS112BV

Spectradrive

Die Radial Engineering Pro DI ist eine kompakte, passive DI-Box, welche sich sehr gut für Keyboards, Drumcomputer und Digitalpianos eignet. Die eigens dafür entwickelten Audioüberträger entsprechen dem außergewöhnlichen Qualitätsmaßstab, der durch den Industriestandard Radial Engineering JDI etabliert wurde.

The ProDI is a passive direct box designed for use on stage or in home recording studios, with the ability to handle high output instruments without distortion, and a transformer-isolated output to eliminate noise from ground loops

Product Page

Review by Guitar Gear 

Manual

Demo by Radial Engineering 

ProDI

The Radial Twin-City uses a class-A input buffer to drive the amp outputs, which reduces susceptibility to noise and allows for completely silent switching on stage. To eliminate hum and buzz from ground loops, the Twin-City is equipped with an isolation transformer on output-B, along with a ground lift switch and 180⁰ polarity reverse switch that ensures both amplifiers play back in phase with each other. At the input, Drag Control load correction allows you to recreate the natural load on the pickups as if you were connected directly to a tube amplifier, allowing the natural tone of your instrument to shine through.

Demo by Full Compass

Demo by X Ray

Review by The Gear Page

Review by Rig-Talk

Twin-City ABY Amp Switcher

The Radial Switchbone ABY is a high performance ABY switcher that is designed to deliver the natural tone and feel of the instrument without introducing noise, distortion or artifact of any kind.

The design begins with the same 100% discrete class-A buffering circuit as the critically acclaimed Radial JD7 Injector for exceptional audio performance. Each part is hand inserted into a double sided through-hole PCB for optimal signal transfer. To ensure the natural feel of the instrument is maintained, Drag™ control load correction lets you re-introduce the natural relationship between the guitar pickup and the amp that is invariably lost when the guitar signal is buffered. This also allows longer cable runs of upwards to 15 meters (50′) without noise.

Review by bonedo

Demo by shnobel

Switchbone JX-2 ABY

The EXTC Stereo allows you to connect guitar effects pedals to the inputs and outputs of pro audio equipment such as recording interfaces and mixing consoles, so you can incorporate stereo pedals into your recordings and explore new creative possibilities.

The EXTC-Stereo gives you the ability to connect stereo effects pedals such as reverbs and delays to the line-level inputs and outputs of your console or recording interface. Use it to send drum overheads to a multi-tap delay, or breathe new life into a stale keyboard patch with a flanger or chorus pedal. Try it on vocals, strings, or any prerecorded track to add a new creative element to your mixes and revitalize your old pedal collection. 



Review by Radial Engineering 

Demo by RecordingMag 

EXTC-Stereo

The Radial J48 has gained a tremendous following through the professional audio community. With significantly more headroom, lower distortion and unmatched durability, it is no wonder that the J48 has become the most specified direct box on stages around the world. As you will note with the specifications below, the J48 is exceptionally linear when tested both under laboratory conditions and when placed under the extra stress of 100 meters (300 feet) of cable. In the lab, the high frequency response actually exceeds 40kHz! This makes the J48 a perfect candidate for the most demanding studio recording while being the obvious choice for the artist on stage.

Featured Artists

J48

Media

Videos

Handbücher

Reviews

Links

Technische Daten

Boards mit diesem Pedal

Bass Pedalboard

Weitere Pedals von Radial Engineering

Radial Engineering

ProDI

Radial Engineering

Twin-City ABY Amp Switcher

Radial Engineering

Switchbone JX-2 ABY

Radial Engineering

EXTC-Stereo

Produkte

Bau dein Board

Services

Community