The Mira is a true bypass optical compressor offering studio-grade sound sculpting and sustain packed with controls you’d normally find on studio units.

Official Product Video

Product Page

Manual

MIRA

The Voyager MKII is a mid-focused overdrive/preamp that contains all the mythical magic from the original Voyager and adds a wealth of features not seen before in a Klon-style pedal. From its lowest to highest settings, the Voyager provides a uniquely superb amount of clarity to any playing style.

At lower gain settings, it brightens the signal and adds clarity to each note. With the gain turned up, the Voyager transforms into a thick overdrive, providing depth to chorded playing while retaining the clarity needed to break through solos.

Demo by Mark Johnston

Review by delicious audio

Review by Gitarre & Bass

Review by Guitar World

Review by bonedo

Voyager Preamp/Overdrive MKII

The Slötvå Multi Texture Reverb is a variant of the Slö but adds on the ability to create and save three presets. Save your favorite dreamscapes by simultaneously pressing and holding down on the bypass and sustain switches. Scroll through them by simultaneously pressing and releasing bypass and sustain.

The Slötvå allows players to create lush, modulated, sleepy, and ambient soundscapes. Stocked with three different algorithms specifically designed to invoke textures for bringing dreams from your subconscious to reality.

The toggle switch allows three different reverb modes, Dark (Lower Octave), Rise (Ambient Swell), and Dream (Latching Pad), while secondary functions on the switch change between different wave shapes for the modulation on the reverb trail.

Combine deep modulation with long washy trails and experience, the Slötvå.

Slötvå

Der Iron Horse V2 ist eine Rückkehr zum klassischen Verzerrer: dick, druckvoll, riffig und rüpelhaft. Das True-Bypass-High-Gain-Ungetüm wurde aktualisiert, um den Hengst zu lenken oder die Zügel für einen voll verzerrten Ansturm loszulassen. Wenn man den Gain zurückdreht, kann man ihn als dicken, warmen Overdrive verwenden. Das Iron Horse verfügt über drei Verzerrungsmodi, die mit einem Kippschalter zwischen verschiedenen Clipping-Dioden umgeschaltet werden können, um den Ton der Verzerrung noch vielseitiger zu gestalten. Links wird etwas Kompression erzeugt. Rechts wird eine stärkere Kompression erzeugt und in der Mitte wird ein weit offenes, nicht komprimiertes Signal erzeugt.

The Halloween tradition continues with the 2018 limited Iron Horse V2 Illustrated by Andrey Pridybaylo. Inspired by the mythological creature Cerberus, or the “Hound of Hades", this beastly creature will compliment the fiercest of down-tuned riffs you can throw at it. 
 

The Iron Horse V2 is a return to the classic distortion: thick, punchy, riffy and rowdy. The true bypass, high gain behemoth has been updated to help steer the stallion or let the reins loose for full on distorted onslaught. Dial back the gain and it can be used as a thick, warm overdrive. The Iron Horse has three distortion modes operated by a toggle switch that changes between different clipping diodes providing more versatility in shaping the tone of the distortion. Left will give some compression. Right will give you a higher amount of compression and middle will give you a wide open, non compressed signal.
 

The Iron Horse V2 updates are as follows:
- Updated the Level control so that it is easier to dial in unity gain. 
- Updated the Tone control to allow more treble to be dialed in if desired. 
- Updated Distortion control to smooth out the range of distortion making it easier to dial in lower gain tones.
 

The Iron Horse V2 comes in a Galaxy Gold finish with black ink. Artwork by illustrator Adam Forster features a new battle ready stallion cloaked in armor.

Demo by Brett Kingman

Iron Horse LM308 Distortion v2

A tone tweakers delight, the EB-10 works as a preamp, EQ and boost with three available presets to meticulously craft your guitar's sound allowing for studio-grade electric guitar tone in a live setting. Each rotary knob offers up to 12dB of boost OR cut of Low, Mid, and High frequencies, based on where you have the toggle switches set. When the Boost switch is engaged, add a 10dB MOSFET boost for some great extra punch.

Use the EB-10 to compensate when switching between low and high output instruments. Push through the mix during solos, or even use the onboard presets as three different gain stages by using combinations of increasing boosted EQ settings and the Boost switch! With nine different EQ positions on each knob, bring out new tonal characteristics you didn't know your guitar or bass even had. 

The EB-10 offers two operating modes, “Live” and “Preset”. In live mode, the pedal responds to current position of all the knobs and switches. Dial in a specific sound and turn the pedal on and off with the Bypass switch. In preset mode, the pedal offers preset slots to store three unique sounds. When in preset mode, the pedal is locked on and the user can scroll through the presets by clicking the Bypass switch. The pedal will boot up in the last known operating mode and if that is preset mode, it loads preset 1 by default. Enter preset mode by pressing and holding the bypass switch for 3 seconds until you see the preset light P1 turn on. Repeat to exit. You are in live mode when all preset lights are off. Refer to the manual on saving presets.

Featured Artists

EB-10 PreAmp / EQ / Boost

Media

Videos

Handbücher

Links

Technische Daten

Weitere Pedals von Walrus Audio

Walrus Audio

MIRA

Walrus Audio

Voyager Preamp/Overdrive MKII

Walrus Audio

Slötvå

Walrus Audio

Iron Horse LM308 Distortion v2

Produkte

Bau dein Board

Services

Community