Helen Zamudio

Full Gig Pedalboard

SL 210 Bass Cabinet

Tester

The Octamizer ® is an analog octave divider that creates a wide range of musical sounds an octave below your original note.
The Octamizer ® features independent volume controls for both the Clean and Octave sounds, so dialing in the exact amount of each is a cinch. The two discrete signal paths also have their own tone controls that were specifically designed to enhance and expand their musical possibilities.

Review by Amazona 

Product Page

Review by Bass Gear Mag

Manual

Demo by Gregor Fris

Official Product Video

OCTAMIZER v2

Based on our coveted Tone Hammer amplifier, the Tone Hammer preamp/DI is our swiss-army knife for your pedalboard. Featuring fully sweepable midrange frequencies in addition to bass and treble controls the Tone Hammer gives you studio-inspired EQ paired with a pristine D.I. for the studio and stage. To give this tone shaping unit the ultimate flexibility we introduce our proprietary Adaptive Gain Shaping circuitry (AGS). AGS allows the player to kick in an additional gain structure allowing you to go from modern tones to vintage, tube-like saturation with the stomp of a button. It’s 18 volt operation gives the Tone Hammer plenty of headroom to reproduce the most dynamic playing styles and it robust design makes this pedal truly road-worthy.

Review by Awkward sound

Demo by  IvanBassist 

Aguilar Tone Hammer

Combo

When we released our original Compressor back in 2011, it quickly became a favorite among guitar and bass players alike who were searching for something more than the typical oversimplified controls found on most compressor pedals. Although our original Compressor sounded great on bass (and still does!) we set out to do even better. 

On top of the full range of features and controls normally only seen in high-end studio equipment, such as input and gain reduction metering, independent attack and release controls, a mix knob for parallel compression, and an external sidechain insert, we’ve now added a fully variable sidechain high pass filter, and a two-position ‘tone + color’ circuit which adds gentle tone sculpting and harmonic distortion, giving your bass some delicious character.  



Demo by 
Fireghosting

Demo by Bass the World 

Review by 
Patrick Hunter

Bass Compressor

When it was introduced in 2010, the original POLYTUNE forever revolutionized the way musicians tune their instruments. Praised by professional and amateur players, guitar tuning instantly became as simple as Strum - Tune - Rock! So how do you make the best-selling polyphonic tuner even better? You take it to the next level by: providing multiple tuning modes, including polyphonic, chromatic, strobe and a variety of altered tunings; adding an onboard BONAFIDE BUFFER to preserve your tone over long cable runs and pedal board signal paths; and upgrading the LED display for even higher tuning accuracy. Say hello to your next tuner – POLYTUNE 3.

Review by Charleston Classical Guitar

Review by musicradar

Demo by American Musical Supply

Demo by Addicted to Gear

Demo by realbeal

Polytune 3

PedalSafe Type G

QuickMount Type G 

Pedal-Montageplatte für Standard TC Electronic Pedale

Pedal Mounting Plate For Standard TC Electronic Pedals

Schutzabdeckung & RockBoard Montageplatte für Standard TC Electronic Pedale

Protective Cover & RockBoard Mounting Plate For Standard TC Electronic Pedals

Schutzabdeckung & universelle Montageplatte für Standard TC Electronic Pedale

Protective Cover & Universal Mounting Plate For Standard TC Electronic Pedals

Wie oft hast du schon vor deinem Lieblings-Ambient-Pedal gesessen und das Gefühl gehabt, dass du wochenlanges Training bei der NASA brauchst, um es zu benutzen? Knöpfe, Schalter, Schieberegler... Es ist oft SO schwer und frustrierend, schnell einen brauchbaren Ton auf diesen Dingern zu finden... Als wir zum ersten Mal über ein Ambient-Pedal nachdachten, hatte die Benutzerfreundlichkeit oberste Priorität, gleichrangig mit einem erstklassigen Klang, der sich mit Pedalen zu einem doppelt so hohen Preis messen kann.

Wie würdest Du ein Pedal wie das Wampler Ethereal beschreiben? Trifft „Ambient Heaven“ zu? Ist es das Tor zwischen dem realen Leben und der Astralebene? Oder ist es einfach nur wunderschön? Es ist schwer zu sagen, welchen Ausdruck man verwenden soll, wenn man über das Pedal spricht, denn sie alle passen perfekt... und natürlich ist es so einfach zu bedienen, dass man sofort die perfekten Ethereal-Sounds erhält.

How many times have you sat in front of your favorite ambient pedal and felt like you need weeks of training at NASA to use it? Knobs, switches, sliders…It’s often SO hard and frustrating to find a usable tone on those things quickly... Keeping that firmly in mind, when we first considered making an ambient pedal, ease of use was a top priority, right up there with top tier quality tone on par with pedals at twice the price.

How do you describe a pedal like the Wampler Ethereal? Does ambient heaven cover it? Is it the gateway between real life and the astral plane? Or is it just gorgeous? It’s hard to know which phrase to use when talking about it, because they all match it perfectly… plus, of course, so easy to use you’ll be getting those perfectly Ethereal tones instantly.

Demo by ProGuitarShopDemos

Demo by  N Stuff Music

Demo by Sweetwater

Review by delicious-audio.com

Review by proaudioland.com

Review by pedalauthority.com

Review by amazona.de

Ethereal Delay and Reverb

Roland Schmidt

Die RockBoard QuickMount Pick Box ist ein hilfreiches Zubehör für Musiker, die alles an einem Ort aufbewahren möchten. Nie wieder verlorene Plektren oder verschwundenes Zubehör! Dank des QuickMount-Systems benötigst du kein klebriges Velcro mehr, die Pick Box lässt sich fest und sicher in das RockBoard Slot Grid klemmen.

The RockBoard QuickMount PickBox is a useful accessory for musicians who want to keep everything in one place. No more lost picks or missing accessories! Thanks to the QuickMount system, you no longer need sticky hook & loop tape. The PickBox snaps securely into the RockBoard slot grid.

RockBoard PickBox

PickBox

ISO Power Block V9 IEC

Das RockBoard RBO B 3.0 TRES B Pedalboard bietet Platz für ca. 5 bis 10 Pedale (entsprechend der Größe der Pedale) und wird mit einem ideal abgestimmten Gig Bag geliefert. Die robuste, wasserabweisende RokTex Oberfläche, der verstärkte Boden aus PVC (Polyvinylchlorid) und die 10 mm Polsterung bieten den perfekten Schutz bei leichtem Transport. Die RockBoard Pedalboard Serie wurde komplett designt, um ein Pedalboard zu schaffen, das leicht, verwindungssteif und robust ist und vor allem die Nutzung einer weiten Bandbreite an Pedalen, als auch Stromversorgungen und deren Montagelösungen erlaubt. Sein einzigartiges und geniales Design basiert auf nur einem einzigen kaltgewalztem Aluminiumblech und hat keine einzige Schweißnaht. Dadurch bietet es eine absolut flache Oberfläche, die komplett genutzt werden kann. U-förmige vertikale Streben geben dem Board zusätzliche Stabilität, ohne es merklich schwerer zu machen, dadurch ist das Board komplett verwindungssteif und verbiegt sich nicht unter maximaler Auslastung. Das innovative Slot-Design funktioniert mit gängigen Montage-Lösungen oder, perfekt, mit unserem RockBoard QuickMount System. Außerdem machen die Slots es einfach, Kabel für einen sauberen Aufbau unter der Board-Oberfläche zu verlegen. Nahezu alle gängigen Netzteile lassen sich entweder direkt unter der Board-Oberfläche oder mit unserem optional erhältlichen The Tray oder BasePlates montieren. Alle RockBoard Modelle (außer der DUO Serie) sind mit den RockBoard All-in-One PatchBays kompatibel, die jedes RockBoard sinnvoll erweitern.

Pedalboard für Effektgeräte
für ca. 5 bis 10 Effektpedale (je nach Größe)
verwindungssteife und leichte Aluminium-Konstruktion
Slot Design für einfache Pedal-Montage
beidseitige Montagebohrungen für RockBoard LED Light (nicht im Lieferumfang enthalten)
hergestellt aus 1 kalt-gewalztem Aluminium Blech
zusätzliche Versteifung durch U-Förmige Stützstrebe
absolut flache, 10° angewinkelte Boardfläche - keine Schweißnähte
Einschub für RockBoard® Module Patchbays
robuste schwarz pulver-beschichtete Oberfläche
Breite 442 mm
Tiefe 236 mm
Höhe inkl. Gummifüßen 37 - 71 mm
Gewicht Board 0,95 kg
inklusive Gigbag
Gewicht Bag ca. 1,2 kg
Innenmaße Gigbag (B x T x H) 480 x 260 x 120 mm
inklusive selbstklebendem Klett- (50 mm breit) und Flauschband (25 mm breit) sowie Kabelbindern

The RockBoard RBO B 3.0 TRES B pedalboard offers space for approx. 5 to 10 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.

pedalboard for effects pedals
for approx. 5 to 10 effects pedals (depending on size)
sturdy and light aluminum construction
slotted design for easy pedal mounting
mounting holes for RockBoard LED Light (not included) on both sides
made from 1 cold-rolled aluminum sheet
additional U-shaped support brace for added rigidity
10 degrees angled and absolutely plain board surface - no weld seams
slot for RockBoard® MOD patch bays
robust black powder-coated surface
width 442 mm / 17 13/32"
depth 236 mm / 9 19/64"
height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"
weight 0.95 kg / 2.1 lbs.
including gig bag
weight gig bag approx. 1.2 kg / 2.65 lbs.
interior dimensions gig bag (L x W x D) 480 x 260 x 120 mm / 18 7/8" x 11 7/16" x 4 3/4"
including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable ties

RockBoard Artists

Your Activity Overview

Full Gig Pedalboard

aguilar

OCTAMIZER v2

aguilar

Aguilar Tone Hammer

empress effects

Bass Compressor

tc electronic

Polytune 3

Wampler

Ethereal Delay and Reverb

RockBoard

PickBox

Products

Build your own board

Services

Community