My future guitar pedalboard

Ampero II Stomp

Kilt V1

Helios Overdrive - Gold Series

Keep Control Expression

Halo – Andy Timmons Dual Echo

Supernova Controller

Polytune 3 Mini

Dual Foot Switch

Canvas Stereo Dual Line Isolator / D.I.

Hammerhead Compressor

Isopower 7

Das JHS Pedals Paul Gilbert PG-14 Signature Distortion Effektpedal bietet ein neues, einzigartiges Schaltungs-Design, das speziell nach Paul Gilberts Vorgaben entwickelt wurde. Das Herz der Schaltung bildet eine FET-basierte Distortion-Sektion, die den Sound, das Feeling und das Ansprechverhalten eines übersteuerten Röhrenverstärkers emuliert. Das Pedal bietet Gitarristen die Möglichkeit die Dynamik und den Tone eines Amps auf 'Stadion-Level' auch bei moderaten Lautstärken zu erhalten. Ein weiteres, einzigartiges aber extrem wichtiges Feature ist der aktive Preamp für die Mitten, der vor die Distortion-Sektion geschaltet ist. Dieses Design-Feature bietet Musikern ein extrem breites Spektrum an möglichen Sounds mit jeder denkbaren Kombination aus unterschiedlichen Gitarren und Verstärkern.

The JHS Pedals Paul Gilbert PG-14 signature distortion is a new and unique distortion pedal specifically designed to Paul's specifications. At the heart of the circuit is a FET based distortion engine that emulates the touch, feel, and the response of a pushed tube amplifier. This circuitry allows the player to have the dynamics and tone of loud stadium level amplifier at low/moderate volume levels. A second unique and essential feature of the design is that an active mid-frequency preamp is located at the front of the FET distortion circuitry. This design feature gives the user a vast sweep of tonal possibilities with any amp or guitar combination. The PG-14 is an end-all pedal for adding the ultimate dirt channel to your amplifier.

Official Product Page

Manual

JHS Paul Gilbert PG-14 - Demo Video - Living Room Gear Demos

JHS Paul Gilbert PG-14 - Review by Gitarre&Bass [DE], [07-2020]

JHS Paul Gilbert PG-14 - Demo Video - Dennis Kayzer

JHS Paul Gilbert PG-14 - Demo Video - Musiker TV

JHS Paul Gilbert PG-14 - Demo / Review Video - The Tone King

JHS Paul Gilbert PG-14 - Demo / Review Video with Paul Gilbert and Josh Scott - Sweetwater

JHS Paul Gilbert PG-14 - Review by Gitarist [NL], [05-2020]

JHS Paul Gilbert PG-14 - Demo / Review Video - Musiker TV

JHS Paul Gilbert PG-14 - Review by Gitarzysta [PL], [04-2020]

JHS Paul Gilbert PG-14 - Demo Video - Guitar Bonedo

Paul Gilbert Signature PG-14

Der JHS Pedals 3 Series Chorus bietet klassische Chorus und Vibrato Modulations-Sounds mit einfachen, intuitiven Regelmöglichkeiten und einer ausreichenden Vielseitigkeit für jeden denkbaren Musikstil. Die Rate- und Depth-Regler arbeiten perfekt zusammen, um von einem subtilen Doubling bis zu extremen Wellen-Modulationen ein breites Spektrum an möglichen Effekten zu liefern. Der Vibe-Schalter nimmt das Dry Signal aus dem Signalweg und bietet so einen echten Pitch Vibrato-Sound ohne das cleane Originalsignal. Jedes Pedal der 3 Series wird von JHS Pedals in Kansas City, MO, hergestellt. Wie man es von JHS Pedals kennt, überzeugen auch hier hochwertige Teile, eine zuverlässige Qualitätskontrolle und die Liebe zum Detail. Jedes Pedal kommt mit drei einfachen Regelmöglichkeiten und einem Schalter, die eine breite Palette an möglichen Sounds bieten und sowohl für Anfänger als auch für Profis geeignet sind. Die JHS Pedals 3 Series wurde entwickelt, um Musiker zu inspirieren und bei der Suche nach neuen Sounds zu einem absolut erschwinglichen Preis zu helfen.

The JHS Pedals 3 Series Chorus offers classic chorus and vibrato modulation sounds, with straightforward controls and enough versatility for any style of music. The Rate and Depth knobs work together to deliver anything from subtle doubling to utterly seasick waves of modulation. The Vibe toggle removes the dry signal so that you will have a simple true pitch vibrato sound without the dry signal underneath. The JHS Pedals 3 Series is a collection of pedals designed to give you affordability and simplicity without compromising quality. Each 3 Series pedal is made by JHS Pedals in Kansas City, MO, using high-quality parts, quality control, and attention to every detail. Each pedal has three simple controls and one toggle that offer a wide range of sounds, perfect for beginners and professionals alike. The JHS Pedals 3 Series will inspire your playing and help you explore new sounds at a totally approachable price point.

JHS Pedals 3 Series - Demo / Review Video - Reverb

JHS Pedals 3 Series Chorus - Demo Video - Living Room Gear Demos

JHS Pedals 3 Series Chorus - Demo Video - Mike Hermans

JHS Pedals 3 Series - Review by Bonedo [DE], [11-2020]

JHS Pedals 3 Series - Review by Gitarre&Bass [DE], [12-2020]

JHS Pedals 3 Series - Demo / Review Video - Musiker TV

JHS Pedals 3 Series - Official Demo Video

JHS Pedals 3 Series - Review by Muzikus [CZ], [03-2021]

3 Series Chorus

In 1962 the worlds first manufactured guitar pedal was introduced in the Maestro Fuzz-Tone. Three years later in 1965, it made its way across the pond from the USA to the hands of a British engineer named Gary Hurst in London. The legend has it that he was asked by a London session player to modify the circuit for more bass and better sustain. After some tweaking, the Tonebender was born. The Tonebender MKI was a three transistor circuit as was the following MKII that came later in 1966. Decades after the Tonebenders heyday of the 1960s, a collector named Dennis Johannsen realized that his 60's era Tonebeder had only two transistors, not three. This discovery caused a puzzling situation because all Tonebender circuits through MKIV are a three transistor design. Through further investigation, it came to light in an interview with Gary Hurst that he did make a very small batch of two transistor Tonebenders in February and March of 1966. Dennis Johannsen named his discovery the MK1.5, and it is one of the rarest pedals ever produced, a collectors dream. The Arbiter Fuzz face that came in late 1966 is an almost direct clone as well as various other two-transistor fuzz circuits of the era. The MK1.5 is a true legend of guitar that almost went unnoticed to history. The sound of this fuzz is very aggressive, full of low end, and sustain. You may also notice a slight velcro-ish type decay as notes decay off in extreme settings. As with most classic fuzz pedals, it loves a dirty amp or overdrive afterward in the signal path. Staying true to the original, I used high-grade carbon composition resistors, oversized capacitors, and two germanium transistors that I hand-matched to the circuit. 

Each small batch of Benders will use different transistors as it is challenging to find reliable sources of these devices in large quantities. The circuit uses vintage positive ground voltage, so do not daisy chain your power with other pedals. Inside the pedal is a battery snap or use any isolated power supply with a normal polarity power cable like your other pedals as I have wired it internally to work that way. The Bender is identical to the original except that I adjusted the taper of the pots to feel more intuitive. I also added a single power supply filter capacitor to help with noise and adjusted one resistor value for more volume. The switching is true-bypass. Each pedal in this batch is built-in identical form, but because of parts tolerances and the slight variance in the transistors, they will all be a bit different while still being the same. Be sure to always have this pedal first in your signal chain; the guitar must be plugged into its input due to the impedance it requires on its input, no exceptions. 

Product Page

Product Review 

Product Demo 

1966 Series Bender

Der Whitey Tighty Compressor ist JHS Pedals Version des klassischen Effekts, den man angeschaltet nicht hört, dafür aber schmerzlich vermisst, wenn er ausgeschaltet ist. Der Whitey Tighty ist so simpel gehalten, dass er deinem Setup und deinem Sound nie im Weg steht, durch das kompakte Mini-Format lässt er sich außerdem problemlos in jedes Pedalboard integrieren. Durch die Möglichkeit Kompression und Clean Signal stufenlos zu mischen hat jeder die Chance seinen perfekten Sound zu finden. Das Pedal arbeitet mit drei intuitiven Regelmöglichkeiten für Volume, Compression und Blend. Mit dem Volume-Regler lässt sich das Level auf Unity Gain einstellen oder leicht boosten, um den wahrgenommenen Verlust durch die Kompression auszugleichen. Der Compression-Regler regelt die Stärke der Kompression von einer subtilen 'Glättung' des Signals bis zu einem ansprechenden Squash, der sich perfekt für Country, Blues, Pop und Rock eignet. Über den Blend-Regler kann man das Verhältnis aus Clean Signal und komprimiertem Signal einzustellen. Auf diese Weise erhält man den natürlichen Klang des Instruments und erhält gleichzeitig eine Kompression in Studioqualität, die deinen Sound auf die nächste Stufe hebt.

The Whitey Tighty compressor is JHS Pedals take on the classic effect that no one may ever know is on, but when it's off you feel like your pants are down. The Whitey Tighty is as simple as it gets while never getting in the way. In a compact mini pedal, you'll save so much space on your pedal board that you'll be able to add to your wardrobe of effects with ease. And with the ability to blend in compression and clean signal, you'll be able to dial in the perfect sound that keeps everything in place. The Whitey Tighty is a FET compressor that has three simple controls: Volume, Compression, and Blend. The Volume control gives you the ability to set your volume at unity gain or slightly boosted to make up for any perceived loss from the compression. The Compression knob controls the amount of compression for everything from a subtle smoothing of your tone to a pleasing squash that’s perfect for country, blues, pop, and rock. Use the Blend knob to dial in the right amount of clean tone along with your compressed signal. This allows you to retain some of the natural feel of your clean tone while giving you the studio-quality compression that brings your sound to the next level. Tighten up your tone with the JHS Pedals Whitey Tighty!

JHS Whitey - Demo by Living Room

JHS Whitey Tighty - Review by Bonedo [DE], [11-2019]

JHS Whitey Tighty - Review by Muzikus [CZ], [02-2020]

Whitey Tighty

Das Kilt wurde in Zusammenarbeit mit StuG von Delirious entwickelt und ist ein 2-in-1-Overdrive/Boost-Pedal mit einem äußerst vielfältigen Klangspektrum. Dieses Pedal verfügt über vier Overdrive-Einstellungen mit zusätzlichen Low-Cut- und Order-Schaltern, um alle Ihre verschiedenen Drive- und Dirt-Bedürfnisse abzudecken, ähnlich wie ein Kilt.

Designed in conjunction with StuG of Delirious, the Kilt is a 2-in-1 Overdrive/Boost pedal with an extremely diverse tone set to work with. This pedal features four overdrive settings with added low-cut and order switches to cover all your various drive and dirt needs much like a Kilt might cover things.

Products

Build your own board

Community

Featured Artists

Services

Kilt V1

Description

Media

Videos

Manuals

Reviews

Links

Technical data

Boards with this pedal